Tweet
As one of the rapidly developing country, Pakistan is one of the Next Eleven, those 11 countries that have high potential to become the world’s largest economies in the 21st century, along with the BRICs. Steel industry as one of the pillar industry in Pakistan is also developing rapidly, which increases the demand to material handling equipment and facilities. As one of the top material handling solution providers, Dongqi crane machine is honored to have the chance to serve the Pakistan steel plant.
Steel plant EOT Cranes project introduction
This is a new steel plant, and the plant layout has been ready, workshop shed construction is proceeding at the same time with EOT Cranes purchasing, and the cranes technical specifications finally is confimed to workshop shed design. There are totally 5 sets EOT Cranes needed, 2 sets 30/10t ladle cranes, 1 set 12t billet handling crane, 1 set 12/5t scrap charging magnet crane and 1 set 12t grab crane.
Production Solution and contract confirmation
Before contract signing, the Pakistan client visited DQCRANS’ factory, which is located in Henan, the “cradle of Cranes”, taking up 240,000 square meters and has 3600 employees including 500 technicians and over 70 senior engineers working and living there.
Dongqi Crane Industry ParkDongqi Crane Industry Park
With the company of Mr. Wang, the chairman of Dongqi Group, the Pakistan client visited every parts and seen the crane production facilities of DQCRANES’ factory. DQCRANES owns “all kinds of manufacturing and detection devices up to 2000 sets. The corporation by right of the capital deploys advanced facilities of the domestic and international brand, such as four guns air protection portal shaped weld, impeller blasting descaling machine, digital control plaint drill, hoist spray paint line, sing-girder spray-paint line, multi-functional digital control lathe, automatic sawing machine, digital bend machine, numerical display lathe and bi-directional boring and milling machine, main girder no juncture automatic forming production linehoise reducer assembly wire to make the stable basement for manufacturing high quality products.”
DQCRANES Crane Production FacilitiesDQCRANES Crane Production Facilities
In order to give the Pakistan client a more vivid presentation about how our EOT cranes work in steel plant, they went to a famous steel plant at local place, one client served by DQCRANES’ electrical overhead travelling cranes. After visiting the steel plant, the purchasing contract is confirmed after the discussion on contract terms, discount and payment terms in the meeting room. Finally they reach the agreement on that DQCRANES will provide 2 complete sets of ladle cranes, and the other 3 sets cranes main girders will be fabricated by client, while DQCRANES will provide the fabrication design and drawings, at the same time, DQCRANES agreed to send engineers to do installation and commissioning work for free for 20 days.
EOT Cranes Applied in Pakistan Steel Plant
Steel plant EOT Cranes project introduction
This is a new steel plant, and the plant layout has been ready, workshop shed construction is proceeding at the same time with EOT Cranes purchasing, and the cranes technical specifications finally is confimed to workshop shed design. There are totally 5 sets EOT Cranes needed, 2 sets 30/10t ladle cranes, 1 set 12t billet handling crane, 1 set 12/5t scrap charging magnet crane and 1 set 12t grab crane.
Production Solution and contract confirmation
Before contract signing, the Pakistan client visited DQCRANS’ factory, which is located in Henan, the “cradle of Cranes”, taking up 240,000 square meters and has 3600 employees including 500 technicians and over 70 senior engineers working and living there.
Dongqi Crane Industry ParkDongqi Crane Industry Park
With the company of Mr. Wang, the chairman of Dongqi Group, the Pakistan client visited every parts and seen the crane production facilities of DQCRANES’ factory. DQCRANES owns “all kinds of manufacturing and detection devices up to 2000 sets. The corporation by right of the capital deploys advanced facilities of the domestic and international brand, such as four guns air protection portal shaped weld, impeller blasting descaling machine, digital control plaint drill, hoist spray paint line, sing-girder spray-paint line, multi-functional digital control lathe, automatic sawing machine, digital bend machine, numerical display lathe and bi-directional boring and milling machine, main girder no juncture automatic forming production linehoise reducer assembly wire to make the stable basement for manufacturing high quality products.”
DQCRANES Crane Production FacilitiesDQCRANES Crane Production Facilities
In order to give the Pakistan client a more vivid presentation about how our EOT cranes work in steel plant, they went to a famous steel plant at local place, one client served by DQCRANES’ electrical overhead travelling cranes. After visiting the steel plant, the purchasing contract is confirmed after the discussion on contract terms, discount and payment terms in the meeting room. Finally they reach the agreement on that DQCRANES will provide 2 complete sets of ladle cranes, and the other 3 sets cranes main girders will be fabricated by client, while DQCRANES will provide the fabrication design and drawings, at the same time, DQCRANES agreed to send engineers to do installation and commissioning work for free for 20 days.
EOT Cranes Applied in Pakistan Steel Plant
Comment